6.24
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
5. Remove and inspect belleville washer
t
and washer
y
. Replace if necessary.
IMPORTANT
Belleville washer must be installed with dome facing the
outer post.
DRIVE CLUTCH SPRING INSPECTION
(2021)
• Measure the Drive Clutch Spring height. Compare to
specification and replace if necessary.
MEASUREMENT
Drive Clutch Spring Height:
7045112: 4.80 in (122 mm)
BEARING INSPECTION
• Verify there is no binding or rough spots. If problems
are noted continue with disassembly.
PVT SYSTEM
To Next Page
Loading...
