Polaroid ModelSmart 250S User Manual

3
INTRODUCTION
The following User Guide provides you
with all of the information you need to
get started printing with your Polaroid
ModelSmart 250S.
It will guide you through the simple
installation of your printer starting with
getting it out of the box, right through
to each of the fantastic features of the
Polaroid Prep printing software and the
easy-to-use touch screen LCD on the
printer itself.
The Polaroid 3D team hope that you have
many happy hours printing with your
new ModelSmart 250S 3D printer, but
if you have any questions at all, please
don’t hesitate in contacting the team via
our online Contact Form.

Polaroid ModelSmart 250S Specifications

General

Print technology	-
Printing material	Polylactic acid (PLA), Wood fiber
Maximum travel speed	100 mm/sec
Layer thickness (max)	350 mm
Layer thickness (min)	50 mm
Maximum build size (WxDxH)	250 x 150 x 150 mm
Filament thickness supported	1.75 mm
Control type	Wireless
Viewing window	Yes
Print resolution	- DPI
3D scanner	No
Compatible memory cards	SD
AC adapter output voltage	24 V
Cables included	AC, USB

Weight and Dimensions

Depth	150 mm
Width	250 mm