Need help?Do you have a question about the Polaroid ModelSmart 250S and is the answer not in the manual?
General| Print technology | - |
|---|---|
| Printing material | Polylactic acid (PLA), Wood fiber |
| Maximum travel speed | 100 mm/sec |
| Layer thickness (max) | 350 mm |
| Layer thickness (min) | 50 mm |
| Maximum build size (WxDxH) | 250 x 150 x 150 mm |
| Filament thickness supported | 1.75 mm |
| Control type | Wireless |
| Viewing window | Yes |
| Print resolution | - DPI |
| 3D scanner | No |
| Compatible memory cards | SD |
| AC adapter output voltage | 24 V |
| Cables included | AC, USB |
Weight and Dimensions| Depth | 150 mm |
|---|---|
| Width | 250 mm |
Guides users through downloading and installing the necessary software.
Process for importing 3D models into the print software.
Steps to configure and initiate the printing process.
Adjusts layer height and print speed for quality.
Selects and initiates printing of models via the LCD.
Addresses problems with removing filament from the extruder.
Solves issues with filament not extruding.
Fixes issues with filament jams and air printing.
To Next Page