Polaroid ModelSmart 250S User Manual

7
howpolaroidareyou
www.howpolaroidareyou.com/soware
Insert the glass bed onto the print bed area
at an angle to ensure it ts underneath the
metal ridge at the back, then lower it onto the
magnets at the front to secure it in place.
An SD card must always be inserted to print
whether by computer or via LCD.
Connect the USB cable.
Connect the power cable and turn on the
printer. Be careful not to damage the cables.
5
6
7
8
9
6
7
8
Download and install the Polaroid Prep Software
from howpolaroidareyou.com/software
Firstly, please insert your serial number and
email address to download the software.
Your serial number can be found on the outer
box/packaging, or on the rear of your printer.
MADE IN THE UNITED KINGDOM BY: Environmental Business Products Ltd. 26 Chase Road, London, NW10 6BB
MODEL:
ModelSmart 250S
Serial No. PL-250-18679-12NSJ
100-240V AC;
24V 5A DC;
50-60Hz
howpolaroidareyou.com
ModelSmart 250S

Polaroid ModelSmart 250S Specifications

General

Print technology	-
Printing material	Polylactic acid (PLA), Wood fiber
Maximum travel speed	100 mm/sec
Layer thickness (max)	350 mm
Layer thickness (min)	50 mm
Maximum build size (WxDxH)	250 x 150 x 150 mm
Filament thickness supported	1.75 mm
Control type	Wireless
Viewing window	Yes
Print resolution	- DPI
3D scanner	No
Compatible memory cards	SD
AC adapter output voltage	24 V
Cables included	AC, USB

Weight and Dimensions

Depth	150 mm
Width	250 mm