Poly Studio X70 Administrator's Guide

2. Select Start Video Capture.
The system alerts the conference room participants and asks for approval to begin the video
capture. Once the room participants approve by select Yes, the video capture begins.
In the system web interface, the system reports that the video capture is in progress.
Once complete, the system web interface reports that the video capture is complete and sent to
Poly Lens.
3. In your Poly Lens portal, go to the Diagnostics page to view the video recording.
The video recording displays as a tvpr_ file, and is available for download.
For more information, see Poly Lens Help.
Wake the System Remotely
You can wake the system from the system web interface.
1. In the system web interface, go to Diagnostics > Remote Monitoring.
2. Go to System Wake and select Wake the System.
End a Session
Use this tool to close a sharing session. All live content is stopped, and all blackboards and
whiteboards are deleted.
■
Select . A message appears informing you that the session will end in 15 seconds.
Wake the System Remotely
105

Poly Studio X70 Specifications

General

Control	Touch interface, remote control
Operating System	Poly VideoOS
Product Type	Video conferencing system
Video Standards	H.264, H.265
Bluetooth	Bluetooth 5.0
Frame Rate	30 fps
Memory	4 GB RAM
Audio	Stereo speakers, microphone arrays
Connectivity	USB-C, Bluetooth, Wi-Fi
Video Output	HDMI
Audio Input	Microphone array
Wireless Protocol	Wi-Fi 802.11a/b/g/n/ac
Video Resolution	Up to 4K
Zoom	5x digital zoom
Interfaces	HDMI, Ethernet
Network Protocol	TCP/IP, DHCP
Security Protocols	802.1x authentication
Management	Poly Lens
Video Conferencing Support	Zoom, Microsoft Teams
Storage	16GB eMMC
Weight	4.4 kg (9.7 lbs)