Poly Studio X70 Administrator's Guide

Factory Restore the Studio E70 Camera
A factory restore completely resets the camera to default settings and restores it to the factory
firmware version.
1. Power off the Studio E70 by disconnecting the power source.
2. On the bottom of the camera, insert a straightened paper clip through the factory restore button
pinhole.
3. While continuing to hold the restore button, reconnect the power supply to turn the system on.
4. When the system LED indicator light turns amber, stop pressing the restore button.
The factory restore is complete when the LED indicator glows solid white.
118
Chapter 14System Maintenance

Poly Studio X70 Specifications

General

Control	Touch interface, remote control
Operating System	Poly VideoOS
Product Type	Video conferencing system
Video Standards	H.264, H.265
Bluetooth	Bluetooth 5.0
Frame Rate	30 fps
Memory	4 GB RAM
Audio	Stereo speakers, microphone arrays
Connectivity	USB-C, Bluetooth, Wi-Fi
Video Output	HDMI
Audio Input	Microphone array
Wireless Protocol	Wi-Fi 802.11a/b/g/n/ac
Video Resolution	Up to 4K
Zoom	5x digital zoom
Interfaces	HDMI, Ethernet
Network Protocol	TCP/IP, DHCP
Security Protocols	802.1x authentication
Management	Poly Lens
Video Conferencing Support	Zoom, Microsoft Teams
Storage	16GB eMMC
Weight	4.4 kg (9.7 lbs)