Poly Studio X70 Administrator's Guide

Setting Description
DNS Server Specifies the DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address
automatically.
DNS Alternate Server
Specifies the alternate DNS server address for the Wi-Fi
network.
This setting is read-only if your system gets its IP address
automatically.
5. Select Connect.
If you’re using Microsoft Team Rooms as a provider, reboot the system.
Configure Wi-Fi Settings from System Device Settings
Set up the Wi-Fi network from Device Settings on your video system or device.
1. Select More > Device Settings.
2. Select Admin Settings, then enter the admin credentials for the system.
3. Select the check box for Enable Wi-Fi, then select Setup a Wi-Fi Network.
4. Follow the onscreen wizard to continue setting up your Wi-Fi network.
54
Chapter 6Configuring Network Settings

Poly Studio X70 Specifications

General

Control	Touch interface, remote control
Operating System	Poly VideoOS
Product Type	Video conferencing system
Video Standards	H.264, H.265
Bluetooth	Bluetooth 5.0
Frame Rate	30 fps
Memory	4 GB RAM
Audio	Stereo speakers, microphone arrays
Connectivity	USB-C, Bluetooth, Wi-Fi
Video Output	HDMI
Audio Input	Microphone array
Wireless Protocol	Wi-Fi 802.11a/b/g/n/ac
Video Resolution	Up to 4K
Zoom	5x digital zoom
Interfaces	HDMI, Ethernet
Network Protocol	TCP/IP, DHCP
Security Protocols	802.1x authentication
Management	Poly Lens
Video Conferencing Support	Zoom, Microsoft Teams
Storage	16GB eMMC
Weight	4.4 kg (9.7 lbs)