• If the default type is Consultative, select Consult and dial a number or select a contact
from Recent Calls or Contacts. Select Complete Transfer after speaking with the
contact.
• If the default type is Blind, select Menu and select Consult . Dial a number or select a
contact from Recent Calls or Contacts and select Complete Transfer after speaking with
the contact.
Cancel a Transfer
If a contact does not answer the transfer or you want to remain speaking with the contact on your line,
you can cancel the transfer before it is complete.
Procedure
» Select Cancel.
The call is not transferred and becomes active.
Rejecting Calls with Don’t Disturb
Do Not Disturb (DND) enables you to set your phone to automatically reject calls when you don’t want to
be interrupted.
When you enable DND, you see the following:
• The DND icon displays in the status bar.
• When the phone is idle, the DND icon displays next to your phone line.
• When the administrator enables hybrid line registration on the phone, you can choose All to enable
DND on all the registered lines.
• If you have new messages or you have enabled call forwarding, the messages or forwarding icon
display instead of the DND icon.
Note: When you set your presence status to Do Not Disturb and enable DND on your phone, a
message reflecting your Do Not Disturb status scrolls under the time display. The DND icon
doesn’t display in the status bar.
Enable Do Not Disturb
You can enable DND to prevent your phone from ringing and to send all incoming calls directly to
voicemail. All calls you receive while DND is enabled are logged in the Recent Calls list.
Enabling DND on shared lines disables ringing only. A visual notification of the call still displays, and you
have the option to answer or ignore the call.
Procedure
» Do one of the following:
• Select DND on the Home screen, if enabled by your system administrator.
• Navigate to Settings > Features > Do Not Disturb, and select Enable.
Audio Calls
30
To Next Page
Loading...
