Note: By default, Poly Trio systems enter Power Saving Mode after a period of idle time to conserve
energy. However, Poly Trio systems don’t enter Power Saving Mode while idle in the Bluetooth or
Wi-Fi menus. To ensure that the system enters power saving mode, exit the Bluetooth or Wi-Fi
menu.
Change Your Office Hours for Power Saving Mode
When you update your office hours, you specify when you start and how long you work each day. After
your work hours, the phone is idle and goes into Power Saving Mode.
Procedure
1. Go to Settings > Basic.
2. Select Power Saving > Office Hours and select Start Hour.
3. Select a day of the week, and using the 24-hour clock, enter a start time from 0 to 23.
4. Select Save.
5. From the Office Hours screen, select Duration.
6. Select a day of the week and enter a duration of 0 to 12 hours per day.
7. Select Save.
Change Idle Timeouts for Power Saving Mode
You can update the period of time the phone is idle before the screen turns off.
You can specify different timeouts for office hours (Office Hours Idle Timeout) and nonoffice hours (Off
Hours Idle Timeout). By default, the Office Hours Idle Timeout is much longer than the Off Hours Idle
Timeout.
You can also specify User Input Idle Timeout period that applies after you press a key or tap the screen
(on touchscreen models). You can choose to set a higher User Input Idle Timeout than the Office Hours
and Off Hours Idle Timeouts. Doings so prevents Power Saving Mode from initiating when you're actively
using the phone.
Tip: If you press a key or tap the screen (on touchscreen models), the phone uses the idle timeout
period with the highest value.
Procedure
1. Go to Settings > Basic.
2. Select Power Saving > Timeouts.
3. Select Office Hours Idle Timeout and enter the number of minutes (1 to 600 minutes) the phone
should wait during office hours before starting Power Saving Mode.
4. Select Off Hours Idle Timeout and enter the number of minutes (1 to 10 minutes) the phone
should wait during off-hours before starting Power Saving Mode.
5. Select User Input Idle Timeout and enter the number of minutes (1 to 10 minutes) the phone
should wait after a key press or screen select before starting Power Saving Mode.
6. Select Save.
Poly Trio Settings
81
To Next Page
Loading...
