12
Getting Started with the VVX D230 DECT
IP Phone
Before you can begin using your VVX D230 Wireless Handset, you must first register it to the base station.
Register the Wireless Handset
You can register up to 10 wireless handsets to the base station.
To register a handset to a base:
1 Press and hold the FIND button on the base station for 5 or more seconds.
2 On the wireless handset, go to Menu > Settings > Registration.
3 Select Register.
When the handset finds the base station, it asks you to register to it.
4 Select Yes.
When the registration is successful, a message indicates successful registration.
Unregister the Wireless Handset
If you need to replace a wireless handset, unregister the wireless handset before you register the new
wireless handset to the base station.
To unregister a wireless handset:
1 On the wireless handset, go to Menu > Settings > Registration.
2 Select Deregister.
The wireless handset displays a message confirming the unregistration.
3 Select Yes.
To Next Page
Loading...
Need help?
General
