VVX D230 Wireless Handset User Guide Using Your VVX D230 DECT IP Phone
17
To start a conference call:
1 During a call, press the New Call soft key.
2 Enter your contact’s number or choose a directory contact, then press Dial.
3 After you answer the new call, press Options > Conference.
Split a Conference Call
When you split a conference into two calls, both calls go on hold, then you can choose which call to make
the active call.
To split a conference call:
1 During a conference call, press Split.
2 Select which call you want to resume.
Join Calls into a Conference Call
When you have an active call and a held call on the wireless handset, you can join the two calls to make a
conference call.
To join two calls into a conference call:
1 With one active call and one held call, press Options.
2 Go to Conference, then press Select.
This establishes a conference call.
Switch Between Calls
You can switch between calls when you have at least one active call and one held call on the wireless
handset.
To switch between calls:
» With one active call and a held call, press Swap.
Park Calls
You can park the current call and retrieve it on another wireless handset by entering the dedicated retrieval
code.
This feature is only available for lines registered with the service that supports call park.
To park a call:
1 During the call, press Options > Call Park.
2 Enter the extension where you want to park the call. For example, enter 6889.
To Next Page
Loading...
