13
Using Your VVX D230 DECT IP Phone
You can perform similar call functions on the VVX D230 DECT IP Phone as you do with a wired desktop IP
phone. This section includes the following call functions you can perform on the wireless handset.
Placing Calls
You can place a call using the default line or an alternate line.
Place a Call Using the Default Line
By default, when you place a call on the wireless handset, the call is placed on the default line.
To place a call using the default line:
» Enter your contact’s number and press the Call button .
Place a Call Using an Alternate Line
You can choose to use an alternate line before placing a call.
To place a call using another line:
1 Press Lines, and select a line.
2 Enter your contact’s number or select a contact from a directory or the recent calls list.
3 Press OK, then press the Call button to dial.
Place a New Call During an Active Call
You can place new calls to contacts during active calls.
To place a new call during a call:
1 While in an active call, press New Call.
2 Enter a contact’s number or choose a contact from the directory.
3 Press Call.
If the called handset has multiple lines, choose a line, then press Call.
To Next Page
Loading...
