Poly VVX D230 - Transferring Calls

VVX D230 Wireless Handset User Guide Using Your VVX D230 DECT IP Phone
16
Place an Intercom Call During a Call
You can create an intercom call with another wireless handset during an active call.
To place an intercom call to another wireless handset during a call:
1 During a call, press Options > Hold.
2 Press New Call, select Intercom, then select the wireless handset you want to connect with.
3 Press the End button when you’re done with your message, and resume the held call.
Transferring Calls
You can transfer a call to another wireless handset, to a directory contact, or to a designated number.
Transfer a Call to Another Wireless Handset
You can transfer a call on your wireless handset to another contact to enable someone else to take the call
or to resume the call on another handset.
To transfer a call to another registered wireless handset:
1 During a call, press Options, then select Transfer.
2 Enter a number or select a contact from a directory or the recent calls list.
3 Press the Call soft key, the Call button, or the OK button.
4 Talk with your contact, then press Transfer again to complete the transfer.
Blind Transfer a Call
You can transfer a call to another contact without speaking to the contact first.
To blind transfer a call:
1 During a call, press Options, then select Blind Transfer.
2 Enter a number or select a contact from a directory or the recent calls list.
3 Press Transfer.
The call is transferred when the contact answers the call.
Conference Calls
You can make a conference call with two contacts at the same time.
Start a Conference Call
You can start a conference call with two other contacts.