Poly VVX D230 - Retrieve Parked Calls; Shared Line Calls; Barge in; Pick up Held Calls

VVX D230 Wireless Handset User Guide Using Your VVX D230 DECT IP Phone
18
Retrieve Parked Calls
You can retrieve a parked call from any phone or wireless handset on the network.
To retrieve a parked call:
1 Enter the retrieval code, then the extension where you parked the call, followed by a pound sign (#).
For example, enter *88 then enter 6889#.
2 Press the Call button .
Shared Line Calls
If there’s a shared line for more than one wireless handset, any of the handsets can receive an incoming
call on the line, barge in on other calls, and pick up a held call.
This feature is only available for lines registered with services that support shared lines.
Barge In
You can barge in on an active call on another wireless handset on the shared line.
To barge in on a call:
1 When there’s an active call, press Lines and select the shared line.
2 Select Options > Barge In.
Pick Up Held Calls
When you place a call on hold on the shared line, you can pick up and resume the call from your wireless
handset.
To pick up a held call:
1 On the wireless handset, press Lines and select the shared line.
2 Select Options > Resume.
End a Call
You can end an active call at any time.
To end a call:
» Do one of the following:
 Press the End button .
 Place the wireless handset in the base station or charging cradle.