Polycom CX5000 - Polycom CX5000 as Conference Phone; Adjust Ringer and Speaker Volume

Polycom CX5000 Deployment Guide
10 Polycom, Inc.
Table 5. Network Settings
Field
Description
Factory default
Device name
A friendly name (at most 63 characters) for the
device. Used in the diagnostics log for tagging the
device. This is not the host name for the device.
(empty string)
DHCP enabled
Determines whether Dynamic Host Control
Protocol (DHCP) is enabled. The options are
checked (DHCP is enabled) and unchecked (DHCP
is disabled).
A check in this field corresponds to a value of
"true"for the DHCPEnabled attribute in
DefaultConfig.xml. If unchecked, the
DHCPEnabled attribute has a value of "false".
Checked
IP Address
When DHCP is disabled, enter the IP address in
xxx.xxx.xxx format
(empty string)
Subnet mask
When DHCP is disabled, enter the subnet mask in
xxx.xxx.xxx format
(empty string)
Default gateway
When DHCP is disabled, enter the IP address of
the default gateway in xxx.xxx.xxx format
(empty string)
Preferred DNS server
When DHCP is disabled, enter the IP address of
the preferred DNS server in xxx.xxx.xxx format
(empty string)
Alternate DNS server
When DHCP is disabled, enter the IP address of
the alternate DNS server in xxx.xxx.xxx format
(empty string)
Table 6. Time Settings
Field
Description
Factory default
Time zone
Time zone for the device
Set to time zone of the country in
which the device is sold. For
devices sold in the U.S. and
Canada, the default time zone is
Eastern standard time. See
Table 15 for country-specific
settings.
Automatically adjust clock for
daylight saving
Checked or unchecked
Reserved
Checked