Getting Started with Your Phone
1 - 9
To log in on the Polycom CX700:
1 After the initial Microsoft Unified Communications introduction screen
appears, the setup screen will appear.
Follow the instructions for setting up the touch screen.
The Sign In screen appears on the graphic display.
2 Using the graphic display’s soft keyboard, enter the following:
— Your Microsoft Lync 2010 sign-in name (for example,
user1@polycom.com)
— Your network domain and username (for example, polycom\user1)
— Your password
3 Select Sign In.
If you have connected your Polycom CX700 IP phone to your computer,
you can log in using Microsoft Lync 2010. Select Advanced, and then select
Sign in via PC.
To Next Page
Loading...
