5. To exit the control screen, select Back .
Turn Your Camera On or Off
You can turn your camera on to show local video or turn your camera off to hide your local video.
Procedure
1. Select Menu > Camera .
2. Select or to show or hide your video.
Turn Camera Tracking On or Off
Cameras with tracking automatically focus on the current speaker, removing the need to manually adjust
the camera.
Note: If you mute your local microphone, the system disables speaker tracking.
Procedure
1. Select Menu > Camera .
2. Select Tracking On or Tracking Off.
Using Camera Presets
If your camera supports pan, tilt, and zoom, you can create up to 10 preset camera positions. Camera
presets are stored camera positions that let you quickly point a camera at predefined locations in a room.
Your camera stores the near camera presets, which are available in or out of a call. Far camera presets
display only in a call, and you can use them to control the far site camera, if enabled by their
administrator.
Note: If camera tracking is on, camera control and preset features are unavailable. Turn tracking off to
access them.
Save a Preset
Save the current camera position as a preset for later use.
Use saved presets to change the near camera position in or out of a call. Far camera presets are
available only in a call.
Procedure
1. Select Menu > Camera .
2. Select Presets .
3. Adjust the camera to the desired position.
4. On the screen, long press the image.
5. Select Save.
Cameras
Polycom, Inc. 25
To Next Page
Loading...
Need help?
General
