Polycom RealPresence Trio 8500 - Manage a Call from the Calls Screen; Mute the Microphones

Page 22 of 33
Horizon | Polycom RealPresence Trio 8500 Full User Guide
© Gamma 2015. All rights reserved. Confidential
In the Calls screen, you can view active and held calls, including conference calls. The following figure
shows an active call and a held call.
Manage a Call from the Calls Screen
From the Calls screen, you can manage a call by holding, resuming, or transferring the call.
Procedure
• Select a call.
1. Do one of the following:
• Select Hold to place an active call on hold.
• Select Resume to make a held call active.
• Select Hang Up to end a call with a contact. You can end active calls only, so resume the held call
first before ending it.
• Select Transfer to send the call to another contact.
Mute the Microphones
You can mute the microphone so other parties cannot hear you.
Procedure