SoundStation2™ Administrator Guide - 30
►White Noise is a signal
whose energy is distributed
uniformly among all frequen-
cies within a band of interest,
which for the SoundStation2™
is approximately from 300 to
3,400 Hertz.
3. Press the Select button to acti-
vate the signal.
Restore Defaults
Restoring the defaults will irretrievably remove all
settings and data that have been entered since the
SoundStation2™ was rst installed.
1. Press the Menu button, choose
Admin Setup and press the
Select button, enter passcode (if
required) and press the ENTER
soft key. Choose Diagnostics
using the Scrolling buttons, and
press the Select button.
2. Choose Restore Defaults using
the Scrolling buttons, and press
the Select button. Press the OK
soft key if you wish to restore
defaults or the CANCEL soft key
or the Exit button to return to the
Diagnostics submenu.
►Phone Book entries and Speed
Dial numbers are not lost when
restoring all defaults.
To Next Page
Loading...
