Chapter 4 Advanced Configuration
© Polycom, Inc. 119 ViewStation FX/VS 4000 User’s Guide
Figure 4-16. LAN & Intranet Screens
If your ViewStation FX or VS4000 is connected to a LAN, enable the
Client option in the DHCP field (if DHCP is available). If you are
connecting the ViewStation FX or VS4000 directly to a PC that is not
connected to the network, enable the Server option for this field.
Caution Do not select the Server option if your ViewStation FX or VS4000 is on
a LAN with other computers. If you do, the VS4000 provides IP addresses to the
other computers on the LAN even though the LAN already has a DHCP server.
Your system administrators may have to repair any network problems this causes.
You can set LAN speed and select a LAN port on the LAN Settings
screen. You can access this screen from the LAN & Intranet screen
by pressing the * button on the remote control.
To Next Page
Loading...
Need help?
General
