Chapter 5 System Information and Diagnostics
© Polycom, Inc. 149 ViewStation FX/VS 4000 User’s Guide
Figure 5-11. VGA Setup Screen
4. Highlight the Pixel Resolution option and press the button.
Select a VGA viewing resolution. The choices are 800x600,
1024x768 or 1280x1024.
5. Press the button to save your setting.
6. Select either VGA “On” or “Off.”
7. Select an option in the VGA Off Mode field.
• Black—selecting this option will display a black screen
when there are no VGA graphics being displayed.
• No Signal—selecting this option will display a blue screen
when there are no VGA graphics being displayed.
Security
Use the Security screen to set the passwords used to access your
ViewStation FX or VS4000 remotely. You are not required to set
passwords on your ViewStation FX or VS4000.
For information about setting up multi-point password, please refer
to “Multi-point Password.”
To Next Page
Loading...
