Polycom ViewStation FX

Chapter 5 System Information and Diagnostics
© Polycom, Inc. 151 ViewStation FX/VS 4000 User’s Guide
Software/Hardware
Highlight the Software/Hardware icon to access the Software and
Hardware screen.
Figure 5-13. Software and Hardware Screen
From this screen, you can access settings and information for
Software, RS-232, and Hardware.
Software
The Software screen provides your ViewStation FX or VS4000 serial
number and information about the software on your system.
RS-232
Use the RS-232 setup screen on the ViewStation FX or VS4000 to
set the baud rate and the modes for the serial port on the back of the
unit. To access the RS-232 setup screen, do the following:
From the System Information menu, select Admin
Setup>Software/Hardware>RS-232.