To Next Page

To Previous Page

Chapter 4 Advanced Configuration

You can enter the following private network dialing rules:

• Number of digits in extension—Set the number of digits in

your dialing extension. This usually applies to systems that are

on a PBX. Sites that dial your system with the same area code

(or city code) and prefix dial using only your extension number.

For example, if your ViewStation FX or VS4000 number is 1 512

231 5432 and you set 5 as the number of digits in your

extension, a system with the number 1 512 231 5632 will

use15432 to dial your system.

• International Dialing Prefix—Enter the prefix that must be

used to place international calls. This prefix is automatically

appended to any international calls made from the GAB. This

overrides the international dialing prefix that is normally set in

the ViewStation FX or VS4000 Country Setup screen.

• Public Network Access (Use Public Network)—Enable this

option if your system can dial calls outside of your private

network.

• Public Network Dialing Prefix—Enter a dialing prefix as

required by your PBX to dial out to the public network. This prefix

is automatically inserted before the dialing numbers to the public

network from the GAB.

• Public Network (same area code) Prefix—Enter a prefix if one

is required to call within the same area code.

• Private Network Access (Use Private Network)—Enable this

option if your organization uses a private network for calls.

• Private Network Dialing Prefix—Enter the dialing prefix

required to dial within your private network. This prefix is used if

your ViewStation FX or VS4000 and the ViewStation FX or

VS4000 you are calling have access to your organization’s

private network.

Private Network Public Network Public Network

Private Network Private Network Private Network

Call From: Call To: Type of Call Placed:

Polycom ViewStation FX User Manual

Other manuals for Polycom ViewStation FX