Chapter 2 Using the ViewStation FX and the VS4000
ViewStation FX/VS 4000 User’s Guide 78 www.polycom.com
To move the cursor left and right, press the number 4 and 6 buttons,
respectively. To move the cursor up and down, press the number 2
and 8 buttons, respectively.
To move the cursor diagonally, use the 1, 3, 7, and 9 buttons.
Buttons 1 and 3 move the cursor diagonally up and to the left and
right, respectively. Buttons 7 and 9 move the cursor diagonally down
and to the left and right, respectively.
The following shows each numeric button and its function.
Number Function
1 Move the cursor diagonally up and to the left.
2 Move the cursor up.
3 Move the cursor diagonally up and to the right.
4 Move the cursor to the left.
5 Toggle to display and not display the cursor.
6 Move the cursor to the right.
7 Move the cursor diagonally down and to the left.
8 Move the cursor down.
9 Move the cursor diagonally down and to the right.
To Next Page
Loading...
Need help?
General
