Polycom VVX 300 - VVX 400 and VVX 410 Phones Hardware

5
Configuration Parameter Changes
The following configuration parameter changes and additions were made to support the VVX
300, 310, 400, and 410 phones:
• Power Saving <powerSaving/>
• User Preferences <up/>
Power Saving <powerSaving/>
The power saving feature automatically turns off the phone’s LCD display when it is not being
used.
Table 2: Power Saving Parameters
Parameter
Permitted Values
Default
powerSaving.enable
0 or 1
0
If 0, the LCD power saving feature is disabled. If 1, the feature is enabled.
powerSaving.idleTimeout.offHours
1 to 10
1
The number of minutes to wait while the phone is idle during off hours before activating power saving.
powerSaving.idleTimeout.officeHours
1 to 600
480
The number of minutes to wait while the phone is idle during office hours before activating power saving.
For the VVX 1500, the default value is 10 minutes.
powerSaving.idleTimeout.userInputExtension
1 to 20
10
The minimum number of minutes to wait while the phone is idle — after the user uses the phone —
before activating power saving.
powerSaving.officeHours.duration.monday
powerSaving.officeHours.duration.tuesday
powerSaving.officeHours.duration.wednesday
powerSaving.officeHours.duration.thursday
powerSaving.officeHours.duration.friday
powerSaving.officeHours.duration.saturday
powerSaving.officeHours.duration.sunday
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
12
12
12
12
12
0
0
The duration of the day’s office hours.
powerSaving.officeHours.startHour.xxx
0 to 23
7
The starting hour for the day’s office hours, where xxx is one of monday, tuesday, wednesday, thursday,
friday, saturday, and sunday (refer to powerSaving.officeHours.duration for an example.