Polycom VVX 300 - Page 16

Polycom® VVX® 300, 310, 400, and 410 Business Media Phone Administrators’ Guide
8
derived configuration until you delete them by selecting Reset Local Configuration
from the phone’s menu, or configure
<device/> parameters. For instructions on how to
reset web and local configurations and more information on <device/> parameters,
see the latest
Polycom UC Software Administrators’ Guide.
To configure the phone through the Web Configuration Utility:
1 Obtain your phone’s IP address.
To see the phone’s IP address, select or from the phone’s Home view,
and select Status > Platform > Phone. Scroll down to see the IP address.
2 Enter the phone’s IP address in the Web browser’s address bar. The following figure
shows a sample IP address in the Web browser’s address bar.
3 Press the Enter key. The Utility login screen displays, as shown next.
4 Select Admin or User, and enter the appropriate password. The Utility’s Home screen
displays.
The default password for an administrator is 456. The default password for a user is 123.
5 Make the desired configuration changes to the phone’s configuration.
6 Press Save.