Polycom VVX 411 Configuration Guide

This Configuration Guide is written as general guide on how to configure the Polycom phone
model VVX 411 to work with PBXware 5.3.4.
Video Tutorial
Video tutorial explaining Auto Provisioning setup for Polycom Phone on PBXware 5.
Requirements
Identifying phone model
To start and successfully complete registration of your Polycom phone you need to know which
phone model you will setup.
From the back of each Polycom phone there are exact model information that you should check.
Although different phone models can have exactly the same requirements and installation
procedure, phone models can also have significantly different requirements and installation
procedure, so that ignorance of your own model may result in the inability to successfully set up
your phone.
Phone firmware
Make sure that your phone is loaded with firmware version 6.0.0, and Polycom firmware pack is
downloaded and extracted to tftp folder on server. For more information please visit Polycom

Polycom VVX 411 Specifications

General

Resolution	320 x 240 pixels
SIP Accounts	Up to 12
Power over Ethernet (PoE)	Yes
PoE	IEEE 802.3af Class 2
Bluetooth	No
Wireless	No
Weight	2.0 lbs (0.9 kg)
Display	3.5-inch color LCD
Ethernet Ports	2 x 10/100/1000
Audio Features	Acoustic Clarity Technology
USB Port	1 x USB 2.0
Headset Support	RJ-9 and USB
Lines	12
Protocols	SIP
Audio Codecs	G.711, G.722, G.729, iLBC, Opus
Speakerphone	Yes, full-duplex