Polycom VVX 500 - Clean Screen; Phone Reboot

Clean Screen
To clean your touch screen without
phone:
 Press the Home button
 Tap Settings (the Gear
icon)
 Press 1 on keypad or
tap onscreen
 Scroll down
using your finger to
 Press 8 on keypad or tap

Wipe the touch screen wit
paper towels
 When finished press a
ny
Phone Reboot
Periodically, the phone may
need to be
configuration
, new software upgrade, or restore B
maintenance.
There are two ways to reboot the phone:

Unplug the power supply
 Wait two seconds
 Plug in the power supply
OR
 Press the Home button
 Press Settings (the Gear
icon)
 Press 1 on keypad or
tap onscreen
 Press 11 on keypad or
tap
 Tap the Yes softkey
Note: The reboot process is complete when the idle display and current time is on the
Polycom VVX 500 & VVX 600
Long Format Guide
V1.2 10-3-13
To clean your touch screen without
accidentally calling someone or activating
features on
icon)
tap onscreen
Basic
using your finger to
swipe from bottom to top of screen
onscreen Screen Clean
Wipe the touch screen wit
h a dry cloth; do NOT use paper products like
ny
button or keypad button on the phone
need to be
rebooted
. Reasons for this include accepting a new
, new software upgrade, or restore B
usy Lamp Field
appearances after
There are two ways to reboot the phone:
Unplug the power supply
icon)
tap onscreen
Basic
tap
onscreen Restart Phone
Note: The reboot process is complete when the idle display and current time is on the
Page 14 of 15
features on
the
facial tissues or
. Reasons for this include accepting a new
appearances after
Impulse
Note: The reboot process is complete when the idle display and current time is on the
screen.