20
You can place and answer calls on your phone using the handset, speakerphone, or headset. You can
alternate among the three modes during calls, if available.
To switch among the handset, headset, and speakerphone:
» During a call, pick up the handset, press the Headset key or press the Speakerphone key .
For example, if you’re using the handset, press the Headset key to switch to the headset, or press the
Speakerphone key to switch to the speakerphone.
When using the speakerphone, the Speakerphone key glows green. When using the headset, the Headset
key glows green if an analog headset is connected or blue if a USB headset is connected. \
Tip: Setting up the phone to automatically use your headset for all calls
If you frequently use a headset, you can set up your phone to always use your headset for calls. For
more information, see Use Your Headset for All Calls.
You can mute the microphone so other parties cannot hear you. Microphone Mute applies to the handset,
headset, and speakerphone. You can still hear all other parties when you mute your microphone. When your
audio is muted, the Mute icon is displayed, and the Mute key glows red, excluding VVX 101 and 201 phones.
To mute and unmute the microphone:
1
During a call, including a conference call, press . The other parties cannot hear you.
2
Press again to unmute the microphone.
You can end an active call on your phone at any time.
To end active calls:
» Do one of the following:
Place the handset on the cradle.
Press End Call.
In the Calls screen, highlight the call and press End Call.
To Next Page
Loading...
