EasyManua.ls Logo

PoolPak HCD 2600 - RoofPak Design and Component Features

Default Icon
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13EGW06-PCPEG-20140813
TM
TM
Section II: Principles, Functions, and Features
ROOFPAK SERIES (HCDH/AWH)
PoolPak™ has taken their most popular PoolComPak™ conguration and repacked it as a self-contained, all-in-
one dehumidication system. This product comprises the RoofPak Series. This offering merges a highly reliable
PoolComPak™ AWH or HCDH base system with an integral air-cooled condenser and either an integral gas furnace or
an electric heater. The RoofPak Series is only available in horizontal conguations which can be utilized over a wide
range of popular applications. The ten and twelve ton models are ideally suited for applications having a surface area
between 1,200 sq. ft. and 2,500 sq. ft.
DESIGN FEATURES
The RookPak Series is designed with features that provide cost savings and greater reliability over traditional systems.
Key features are:
Single, self-contained unit can be installed with one crane lift
Enclosed refrigerant system reduces refrigerant charge
Factory assembly ensures wiring and brazing are accomplished under ideal situations
Single power connection to minimize eld wiring. (Separate power connection required for integral electric heat.)
Durable Construction
Heavy duty construction designed for outside installation to withstand the elements
Double-wall construction enhances product longevity
Designed for quiet operation
Rooftop Installation
Requires only one mounting curb
Bottom return air
Bottom supply air
Side outside air
Microprocessor Controller
Utilizes the PoolPak™ proven ECC-PCP, microprocessor based contol technology
Incorporates Remote Access Package (RAP) to allow system access via the ethernet/internet
RAP is easily adaptable to BAS systems including BACnet (MS/TP & IP), LonWorks, and Modbus
Heating Packages
200 MBH or 240 MBH indirect gas furnace for consistent temperature control
20kW or 30kW electric heater (requires separate power connection)
Hot water coil using PoolPak™ standard Hycor Blue coil or optional Electro-Guard™ coils
Self-Contained Air-Cooled Condensing Section
Built-in Air Cooled Condenser (ACC) reduces cost and eliminates eld piping
Utilizes efcient dual rotary blade fans
Efcient to 105°F ambient outside air temperature
Choice of coil coatings for specic applications
Evaporator Coil Options
Hycor Blue (standard)
Electro-Guard™ Plus
All copper

Table of Contents

Related product manuals