PoolPak R-410A SWHP Series - Figure 2-2. SWHP SR System Schematic; Figure 2-3. SWHP SEP System Schematic

11EGW05-SWHPEG-20140724
TM
TM
Figure 2-2. SWHP SR System Schematic
Figure 2-3. SWHP SEP System Schematic
WARM
RETURN
AIR
FROM
POOL
SUPPLY
AIR TO
POOL
T
H
T
H
COMPRESSOR
DAMPER
EVAPORATOR
COIL (HEAT
RECOVERY
COIL)
EXPANSION
VALVE
POOL WATER
CONDENSER
HOT LIQUID REFRIGERANT
HOT GAS REFRIGERANT
COLD LIQUID REFRIGERANT
COLD GAS REFRIGERANT
TEMPERATURE SENSOR
RELATIVE HUMIDITY SENSOR
SUPPLY
FAN
OUTSIDE
AIR
S
S
S
SOLENOID
VALVES
TO AIR-COOLED
CONDENSER OR
WATER-COOLED
CONDENSER
(OPTIONAL)
COOL POOL WATER
FROM AIR-COOLED
CONDENSER OR WATER-
COOLED CONDENSER
(OPTIONAL)
WARM POOL WATER
AUXILIARY POOL
WATER HEATER
(SUPPLIED BY OTHERS)
CONDENSER/
REHEAT COIL
AUXILIARY HEATING COIL
(OPTIONAL HOT WATER,
NATURAL GAS INDIRECT-FIRED
FURNACE, STEAM OR ELECTRIC)
T
H
RECEIVER
NOTE: ALL ITEMS WITHIN
DASHED LINE AREA ARE
CONTROLLED BY POOLPAK
MICROPROCESSOR CONTROLLER
NATATORIUM
COLD SURFACE
TEMPERATURE
SENSOR
T
EXHAUST
FAN
EXHAUST TO OUTSIDE
PURGE
FAN
PURGE TO OUTSIDE
GLYCOL PUMP
HEAT RECOVERY
OPTION