Porter Reliant - 5 Programming; Date and Time; Measurement Units and Options

PORTER Reliant
19
5. PROGRAMMING
5.1 DATE AND TIME
Push the key
Set
and use the arrow keys to adjust the value. Whenever key Set is pushed, a different
time parameter can be controlled:
PRESS IN A
SEQUENCE
DISPLAY
TIME
PARAMETER
TO BE SET
USE KEY
to increase the value or
to decrease the value
SET
SET YEAR
YEAR
SET
SET MONTH
MONTH
SET
SET DAY
DAY
SET
SET HOUR
HOUR
SET
SET MIN
MINUTES
SET
Exit the programming mode
Example: for hour adjustment, press key
Set
four times and set the time by the arrow keys.
5.2 MEASUREMENT UNITS AND OPTIONS
Push in a sequence the
keys
S et
and
to access the pro-
gramming mode
Display Pressure is showing:
SET UNIT °C
or
SET UNIT F
Display Time is showing:
L1
L2
L3
L4
L5
L6
Push the key to set the desired tem-
perature measurement unit.
Push more times the key
L1 = Italian
L2 = English
L3 = Spanish
L4 = French
L5 = German
L6 = saving the sterilization cycle data
on PC (through a link with an ex-
ternal optional interface)
Push the key
Set
Display Pressure is showing:
SET UNIT BAR
or
SET UNIT PSI
Push the arrow keys to set the desired pressure
measurement unit.
Push again the key
Set
to exit the programming mode.
The sterilizers are generally factory preset on measurement units and options normally used in the desti-
nation countries (i.e. measurement units: °C, bar / printout language: L2).
language of the print
report