Potec PLC-8000 - Notes for Using the Instrument

- 2 -
3. Notes for Using the Instrument
 Do not hit or drop the instrument. The instrument may be damaged if it receives a
strong impact. The impact can damage the function of this instrument. Handle it with
care.
 Exposure to direct sunlight or very bright indoor lights can influence the results of
measurements.
 Sudden heating of the room in cold areas will cause condensation of vapor on the
protective glass in the measurement window and on optical parts inside the
instrument. In this case, wait until the condensation disappears before performing
measurements.
 Disconnect the power supply and consult the dealer when there is smoke, strange
smell, or noise while working.
 If you want to connect this with other equipment, consult the dealer.
 Don’t use organic solution such as alcohol, thinner, benzene, etc. to clean the
surface of this instrument. It may damage the instrument.
 If you leave the PLC-8000(pola) without using it for long periods, disconnect the
power supply and protect the unit with dust cover.
CAUTION
Do not Use this device for any purposes other than those intended.
POTEC is not responsible for accidents or malfunctions caused by
misuse.