Potec PLC-8000 - Features; Classification

- 1 -
1. Features
 Can measure, Astigmatism, Binocular balance tests, Fixation disparity tests, Fusion
tests, stereo test with only one equipment
 Can make efficient eyesight measurement without changing position of handler.
 LCD monitor features associated with the use of the computer graphics processing of
Specific chart (Chart) Table of 1m ~ 8m in front of video a patient displayed on the
LCD screen is installed.
 It is efficiently operated in an eyesight test even though the tester doesn’t move.
 It is possible to connect with external devices by RS-232 terminal connection
 PLC-8000(pola) is LCD module to apply, a special chart to display the red and green.
 Intended Use
This device (PLC-8000(pola)) measures the refractive power of the human eye, i.e.
measuring visual acuity.
 Label
CAUTION
Do not use RS-232C communication for any other purpose for
cybersecurity.
2. Classification
 Classification of equipment: Class I / Rule 13 (MDR, Annex VIII)
 Type of protection against electric shock: Class I Equipment
 Degree of protection against electric shock: None
 Degree of protection against ingress of water as detailed in the current edition of IEC
529: IP20
 Method of sterilization or disinfection recommended by the manufacturer: None
 Degree of safety or application in the presence of a flammable anesthetics mixture
with air or with oxygen or nitrous oxide: Equipment not suitable for use in the
presence of a flammable anesthetics mixture with air or with oxygen or nitrous oxide
 Mode of operation: Continuous operation