Power Measurement 3300 ACM - APPENDIX A: MECHANICAL & MOUNTING DIMENSIONS

3300 ACM Installation and Operation Manual Power Measurement Ltd.
Appendix A: Mechanical Dimensions A-1
APPENDIX A
MECHANICAL & MOUNTING DIMENSIONS
Display Cable
The single cable which connects the Display
Module to the Base Module is a standard DB25
serial communications cable, 6.0 ft. (1.8 m) in
length, with approximate diameter 0.3 (7.6 mm).
Figure A-1 Display Module
Front View
1.00’’ Depth
(25.4 mm)
4.50’’
(114.3 mm)
7.66’’
(194.6 mm)
Figure A-2 Display Module
Rear View
0.8’’ (20.3 mm)
Four #10/32 Mounting Studs
0.625’’ (16 mm) in length
Drill four mounting holes
0.2’’ (5 mm) diameter
DISPLAY CABLE CONNECTOR
Minimum required panel cutout
2.3’’ (58.4 mm)
2.00’’
(50.8 mm)
3.38’’
(85.9 mm)
0.56’’
(14.2 mm)
3.83’’ (97.3 mm)
2.14’’ (54.4 mm)
C
3.38’’ (85.9 mm)
Existing ANSI C39.1
panel cutout
(meter replacement)
Courtesy of NationalSwitchgear.com