x
Powerware 9315 (500 kVA--750 kVA) T1 and T3 Installation Addendum
164201244--001 REV. A 011500
For More Information
This manual describes how to remove and install transform ers T1 and T3. For
information about the installation and operation of the Powerware 9315 (500 kVA
---750 kVA) UPS , refer to the fol lowing:
164201244 Powerware
9315 (500 kVA---750 kVA) UPS Installation and
Operation
Installation Provides installation instructions for the UPS cabinet, and
optional components and accessories. Site preparation,
planning for instal lation, and wiring and safety information are
supplied. Detailed illustrations of cabinets and optional
accessories, including dimensional and connection point
drawings are provided.
Operation Describes the UPS cabinet Control Panel and Monitor Panel, and
explains the functions of the UPS; discusses the standard
features of the UPS and optional accessories; provides
procedures for starting and stopping the UPS, and information
about maintenance and responding to system events.
A l s o d e s c r i b e d a r e t h e R S --- 4 8 5 a n d R S --- 2 3 2 s e r i a l
communications capabilities of the UPS system; discusses the
two communications ports on the Customer Interface Panel
inside the UPS and how to connect optional remo te accessories
to your UPS system; provides information about enabling,
disabling, and customizing building alarms.
Contact your local Field Service office for information on how to obtain copies of
this manual.
Getting Help
If you have a question about any of the information in this manual, or if you have a
question this manual does not answer, please call Powerware Corporation Field
Service:
United States 1-800-843-9433
Canada 1-800-461-9166
Outside the U.S. Call your local representative
To Next Page
Loading...
