EasyManua.ls Logo

Powerware 9315 - Safety Considerations

Powerware 9315
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ix
Powerware 9315 (500 kVA--750 kVA) T1 and T3 Installation Addendum
164201244--001 REV. A 011500
Safety Considerations
The UPS cabinet is designed for industrial or computer room applications, and contain
safety shields behind the doors. However, the UPS system is a sophisticated power
system and should be handled with appropriate care, following these guidelines:
· Keep surroundings clean and free from excess moisture.
· Do not operate the UPS system close to gas or electric heat sources.
· The system is not intended for outdoor use.
· The operating environment should be maintained within the parameters
stated in this manual.
· Keep the cabinet doors closed and locked to ensure proper cooling airflow
and to protect personnel from dangerous voltages inside the unit.
· The UPS system cont ai ns it s own power source. Lethal voltages are
present even when the UPS is disconnected from utility power.
WARNING:
Only AUTHORIZED SERVICE PERSONNEL should perform maintenance on or
service the UPS system.
If service or routine maintenance is required:
· Ensure all power is disconnected before performing installation or service.
· Ensure the area around the UPS system is clean and uncluttered.
· Battery maintenance or battery replacement should be performed only by
authorized service personnel.
· Observe all DANGER, CAUTION, and WARNING notices affixed to the
inside and outside of the equipmen t.

Table of Contents

Other manuals for Powerware 9315

Related product manuals