Product Owner’s Manual: Club Features 8
Club Features
These next few pages provide information that lets you customize
the EFX for your club or facility. All these features remain hidden to
the facility’s patrons and can only be accessed using special key
presses. Read this section if you want to:
• Change the display to a different language
• Change the display to U.S. standard or metric
• Set the maximum workout and pause times
• Set a cool-down time limit
• View the odometer
• Display the number of hours the EFX has been in use
• View the software versions and part numbers
• Check the error log
• Display the serial number
• Connect to CSAFE equipment
Club Programming Tips
• Always start at the Precor banner.
• Electrical power must be supplied. A minimum stride rate (40
strides per minute) must be maintained while programming the
EFX. A constant power source is available if you use the optional
power adapter. If you plan to program the EFX, purchasing the
optional power adapter is highly recommended.
Note: If you do not use the optional power adapter and the
pedaling speed falls below 40 spm, no warning is given when
the EFX moves into its 30-second shutdown procedure.
• The club programming mode is accessed by pressing the
RESET key at the Precor banner. The remaining key presses
must occur quickly and without pause.
• The function of the QUICKSTART key is disabled while in club
programming mode.
• The club programs appear sequentially. Pressing the ENTER key
saves the changes you make and moves you through the
programs. The SELECT key displays the name of the data field
you are viewing or toggles between the available selections. To
exit a program without saving any changes, press the RESET
key.
To Next Page
Loading...
Need help?
General
