Product Owner’s Manual: Club Features 10
Setting an Exercise Session Time
You can limit how long a user can exercise on the EFX. For example,
if you set the time limit to 20 minutes, users can only enter a workout
time between 1 and 20 minutes.
Note: The automatic cool-down period is appended to the end of
any time-based program, so adjust the time limit accordingly.
You can also let a user exercise indefinitely by selecting the NO
LIMIT option. However, you will need to instruct users on how to
access this option. When a user begins an exercise session, he or
she must use the arrow keys to display INFINITE at the workout time
prompt, and then press ENTER.
5. At the SET MAX WORKOUT TIME prompt, use the arrow keys
to display the available time limits. Choose between 1 and 240
minutes. Or, choose NO LIMIT.
Note: When you press and hold an arrow key, the selections
increment by five, for example, 5, 10, 15, and 20. When you tap
an arrow key, the selections increment by one.
6. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.
Setting a Pause Time Limit
You can limit how long a user can pause while exercising on the EFX
by entering a time between 1 and 120 seconds (two minutes). For
example, if you set the pause time limit to 60 seconds, the display
automatically resets to the Precor banner if no pedaling occurs for
one minute.
Important: The optional power adapter must be connected to
establish a definitive pause time limit. If the optional power adapter
is not attached and the stride rate drops below 40 strides per
minute, the EFX begins its 30-second shutdown effectively
eliminating pause mode.
7. At the SET MAX PAUSE TIME prompt, use the arrow keys to
cycle through the available time limits. Choose between 1 and
120 seconds (two minutes).
8. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.
To Next Page
Loading...
Need help?
General
