User’s Reference Manual: Display Console 13
Table 3 shows the degree of incline for each CrossRamp
setting.
Table 3. Incline movement
The incline setting affects the column height in the program
profile as shown in Diagram 5.
Diagram 5: Column height affected by changes in incline
During the setup phase, pressing the CROSSRAMP arrow
keys will not affect the ramp incline. However, the arrow keys
do affect what appears on the display. Refer to Selecting a
Program.
Changing the Display Features Using
the SELECT Key
Use the SELECT key to choose which feature appears on the
display. When you enter a program, TIME and PROFILE are
preselected and will appear in the center display.
You can display different information while you exercise by pressing
the appropriate SELECT key. When the light next to the feature turns
on, the information appears in the center display.
The EFX can scan between a number of the features so you do not
need to press a key once scanning is set up. If the indicator light is
off, the item will not appear in the display. If the indicator light is on,
the EFX includes it in the scan.
Unit Incline Setting Degree of Incline
EFX524i 1 through 20 13° through 40°
EFX534i Stationary Fixed at 20°
1 – 3
4 – 6
7 – 8
9 – 10
11 – 12
13 – 14
15 – 20
Column height Incline Setting
Select TIME, STRIDES, STRIDES/MINUTE, or
CALORIES with the left SELECT key.
Select PROFILE, CALORIES/MINUTE,
WATTS, or METS with the right SELECT key.
15:32 132
To Next Page
Loading...
Need help?
General
