Product Owner’s Manual: Club Features 14
User ID Entry with CSAFE Equipment
The EFX is fully compatible with CSAFE protocols. When the unit is
connected to a CSAFE master device and the user maintains a
stride rate above 40 strides per minute (spm), the user is prompted
for a user ID.
Note: If the optional power adapter is being used, then no pedaling
is necessary for user ID entry.
A message appears on the display and indicates when the user ID is
accepted by the CSAFE master device. Then, the program prompt
appears. The user has the option to choose QUICKSTART or select
a program and begin exercising.
If the user’s stride rate drops below 40 spm while using the CSAFE
device connection, a prompt PEDAL FASTER appears. If the stride
rate remains below the 40 spm threshold for the next twenty
seconds, the CSAFE connection is terminated. The word
RESETTING may appear on the display while the EFX disconnects
from the CSAFE device.
To review information about CSAFE specifications, visit the web site
at: www.fitlinxx.com/csafe
If you have questions or need technical support, refer to Obtaining
Service.
To Next Page
Loading...
Need help?
General
