Product Owner’s Manual: Club Features 13
11.When you no longer need the information in the error log, press
QUICKSTART for at least four seconds to delete the error log.
Continue to maintain light pressure on the key as the prompt
CLEAR? appears. Once the prompt OK is displayed, you can
release the key.
Important: You cannot retrieve the error log once you have
deleted it. You may want to resolve any issues you are
experiencing with the EFX before clearing the error log.
When the error log is cleared, 1: — — — appears in the display
indicating that the error messages have been deleted.
12.When you are ready, press ENTER to move to the next display
(serial number).
Displaying the Serial Number
SER NUM appears on the display. The serial number is helpful
when you contact Customer Support.
Note: If no serial number appears, use the serial number found
on a label on the rear cover (Diagram 1).
13.If you have not already done so, write the serial number onto the
Warranty Registration card. You can also register online at
www.precor.com.
14.When you are ready, press ENTER to return to the Precor
banner.
To Next Page
Loading...
Need help?
General
