CONSOLE KEY FUNCTION/DESCRIPTION
BACK
• On P62 consoles, use the control keypad BACK button to go
back or return to the previous menu.
• Continue selecting the BACK hardkey to exit the service software.
PAUSE hardkey Stop a running diagnostic test.
LED Console Standard Service Menus
Standard service menus for LED consoles (P10, P30, P30i and P31).
Hardware Validation Diagnostics Tests Menu (51765761)
Service Access Code: 51765761 (see "Service Access Codes" on page 12)
menu: Access code (51765761) > Hardware Validation Tests.
The Hardware Validation menu provides a set of automated diagnostic tests and hardware cal-
ibration routines used to troubleshoot, calibrate, and verify machine operation. The diagnostic
tests are customized for the particular equipment type and console configuration.
DIAGNOSTIC TEST TEST DESCRIPTION
DISPLAY TEST
Tests the console LEDs. Successively press the OK key to verify
each group of LEDs and verify that all LEDs illuminate. Press
Back to exit the test.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 20
4 Standard Service Menus
LED Console Standard Service Menus
To Next Page
Loading...
Need help?
General
