Precor GEN06 Series C952 - Viewing Error Codes; Troubleshooting with Error Codes

Viewing Error Codes
Error codes are viewed in the service software Information Display Error Log (see "Error Log"
on page73). There are 2 methods to access the Error Codes:
l :"Error Log" on page73: Access the Information Display (6,5) and select Error Log.
l Quick Access: Press and hold the Reset/Pause key for a minimum of 6 seconds will
directly access the Error Log and show any stored error codes. If there are no stored
error codes, the STUCK KEY message will be shown.
Troubleshooting with Error Codes
Getting Started
You will need a copy of the “ Error Code Troubleshooting Guide ” to learn Information about the
error codes including the code description, related issues/symptoms, troubleshooting and
repair information, click Error Code Troubleshooting Guide.
IMPORTANT: Error Code description and Troubleshooting information is contained in
the Error Code Troubleshooting Guide , see Error Code Guide.pdf.
The Error Code Troubleshooting Guide contains the following information:
l The error code description
l The affected system components
(Undefined variable: TRM700-16Base.ServiceManualTitle)
71
6Troubleshooting