2. Increase the speed to 9 mph (14 kph) and then 12 mph (19 KPH) making sure that the
tracking remains centered, make small adjustments as needed.
3. Verify that the treadmill is level, adjust as necessary.
4. Verify the running belt/deck surfaces are clean.
5. Replace all covers.
6. Verify treadmill operation (see ) and return to service.
.See Also
"Adjustment Procedures" on page 39
"Running Belt and Deck Replacement" on page 81
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 47
5 Adjustment Procedures
Running Belt Tension and Tracking Adjustment
To Next Page
Loading...
Need help?
General
