Tension and Tracking Adjustment" on page 45 procedure.
16. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take-Up roller shaft, see "End Cap & Belt Guard Cover Replacement" on page 66.
17. Replace the end cap, see "End Cap & Belt Guard Cover Replacement" on page 66.
18. Replace the hood cover.
19. Verify treadmill operation per "Operation Verification" and return to service.
.See Also
"Replacement Procedures" on page 48
"Adjustment Procedures" on page 39
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 58
6 Replacement Procedures
Drive Belt Replacement
To Next Page
Loading...
Need help?
General
