General Information
The following information provides general equipment and service information that will help
you to use this manual to properly repair and maintain the treadmill.
Orientation
The equipment orientation (front, right, left, back) used in manual is referenced to a user stand-
ing on the equipment facing the console.
Tools
General set of service and repair tools.
l US and Metric Hex Key set l Standard and Philips screw driver set
l US SAE and Metric Wrench set l DVM Multimeter
l Torque wrench l Crank Puller (recommended Park Tool CCP-22)
l US SAE and Metric socket set l Belt Tension Gauge (recommended Kent-Moore BT-33-73-
F)
l Running belt tension gauge
(pn PPP00000002000710
Parts
IMPORTANT: Always purchase OEM replacement parts and hardware from Precor.
If you use parts not approved by Precor, you could void the Precor Limited Warranty.
Use of parts not approved by Precor may cause injury.
Exploded View Diagram and Parts List
There is a copy of the parts
Exploded View Diagram
and
Parts Identification List
included in
the "Parts" on pageî111 chapter that you can use as a quick reference. It is recommended that
you go to the servicer partners Precor Connect (or Precor Connection) website to view the
(Undefined variable: TRM700-16Base.ServiceManualTitle)
3
1 Introduction
General Information
To Next Page
Loading...
