Precor GEN06 Series C952 - Input Power and Machine Controls Troubleshooting

Input Power and Machine Controls Troubleshooting
Errors in this section cover either input power (error 15 & 16) conditions, Console controls
(error 5 & 80-83), or processor/memory (error 9 & 11) conditions. These are errors that
although they are valid to the proper function of the machine, are not part of a specific treadmill
base system (lift system, drive system, deck & belt system, etc…). Follow the steps for error
code 5, 9, 12, 15, 16, 80, 81, 82, or 83 on the following pages.
Related Error Codes
l Input Power: 15,16,
l MachineControls: 5, 80-85.
l Processor Memory; 9:11.
Refer to the Error Code Troubleshooting Guide for error code description and troubleshooting
information.
Procedure
Refer to the Error Code Troubleshooting Guide .
See Also
"System Troubleshooting Procedures" on page74
(Undefined variable: TRM700-16Base.ServiceManualTitle)
90
6Troubleshooting