Precor GEN06 Series C952 - Page 34

2. Increase the speed to 9 mph (14 kph) and then 12 mph (19 KPH) making sure that the
tracking remains centered, make small adjustments as needed.
3. Verify that the treadmill is level, adjust as necessary.
4. Verify the running belt/deck surfaces are clean.
5. Replace all covers.
6. Verify treadmill operation (see "Operation Verification" on page8) and return to service.
.See Also
"Adjustment Procedures" on page20
"Running Belt and Deck Replacement" on page61
(Undefined variable: TRM700-16Base.ServiceManualTitle)
28
4 Adjustment Procedures
Running Belt Tension and Tracking Adjustment