Precor GEN06 Series C952 - Page 39

7. Reconnect the Auto Stop Cable to the Auto Stop Sensor Assembly.
8. Replace front hood and side step cover.
9. Connect power cord and Switch the input power ON.
10. Verify the Auto Stop function by doing the Auto Stop diagnostics test, see "Hardware
Validation - Diagnostic Tests (51765761)" on page13.
11. Verify treadmill operation per ""Operation Verification Procedure" on page8" and return
to service.
.See Also
"Replacement Procedures" on page29
(Undefined variable: TRM700-16Base.ServiceManualTitle)
33
5 Replacement Procedures
Auto Stop Sensor Replacement